Removal Procedure
- Remove the front floor
console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gauges, and Console.
- Disconnect the park/neutral position switch electrical connector.
- Remove the park/neutral
position switch bolts.
- Remove the park/neutral position switch from the transmission
control.
Installation Procedure
- Ensure that the transmission
control is still in the NEUTRAL position.
- Install the tang on the park/neutral position switch, into the
slot on the transmission control.
- Adjust the park/neutral switch. Refer to
Park/Neutral Position Switch Adjustment
.
- Connect the park/neutral
position switch electrical connector.
- Install the front floor console. Refer to
Front Floor Console Replacement
in Instrument
Panel, Gauges, and Console.