Was the entire power system check performed?

--

Go to Step 2

Go to Power Seats System Check

1. Using a DMM, backprobe between the rear height motor connector terminals A and B.
2. Press and hold the rear end of the driver seat adjuster switch in the UP and then DOWN positions.

Is voltage present in both cases?

9-14 V

Go to Step 3

Go to Step 4

Replace the rear height motor. Refer to Front Seat Power Recliner Replacement .

Is the repair complete?

--

Go to Step 9

--

1. Disconnect the power seat switch.
2. Check for a short to ground in circuits 282 and 283.

Is a short to ground present?

--

Go to Step 5

Go to Step 6

Repair a short to ground in circuit 282 or 283.

Is the repair complete?

--

Go to Step 9

--

Using a DMM, check continuity in circuits 282 and 283.

Is there continuity in both circuits?

--

Go to Step 7

Go to Step 8

Replace the power seat switch. Refer to Power Seat Adjuster Mechanism Replacement .

Is the repair complete?

--

Go to Step 9

--

Repair the poor connection or open in circuit 282 or 283.

Is the repair complete?

--

Go to Step 9

--

1. Turn the ignition switch to the OFF position.
2. Reconnect all connectors/components removed.

Have all the repairs been made?

--

Go to Power Seats System Check

--