GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1999 🢒 Firebird 🢒 Body and Accessories 🢒 Interior Trim 🢒 Luggage Screen Support Replacement

Removal Procedure

    Object Number: 403354 Size: SH
  1. Remove the cargo compartment side trim panel (drivers-side only). Refer to Cargo Area Side Trim Panel Replacement in Interior Trim.
  2. Remove the left section (1) of rear compartment trim panel carpet (felt liner at rear).
  3. Remove the luggage screen support bolt/screw from support (2).
  4. Remove the support (2) from vehicle body (3).

Installation Procedure

    Object Number: 403354 Size: SH
  1. Install the support (2) to vehicle body (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install luggage screen support bolt/screw to support (2).

    3. Tighten
    Tighten the bolt/screw to 6 N·m (53 lb in).

  3. Install the left section (1) of rear compartment trim panel carpet into original position (felt liner at rear).
  4. Install the cargo compartment side trim panel (drivers-side only). Refer to Cargo Area Side Trim Panel Replacement in Interior Trim.