Removal Procedure
- Remove the front end fascia
outer deflector bolts (2) from the following components:
• | The front bumper fascia lower deflector (1) |
- Remove the front end fascia outer deflector (1) from the
vehicle.
Installation Procedure
- Install the front end
fascia outer deflector (1) to the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the front end fascia outer deflector bolts (2)
to the following components:
• | The front bumper fascia lower deflector (1) |
Tighten
Tighten the front end fascia outer deflector bolts (2) to 10 N·m
(89 lb in).