GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Firebird 🢒 Engine 🢒 Engine Mechanical - 5.7L 🢒 Power Steering Pump Rear Bracket Replacement

Removal Procedure

    Object Number: 354413 Size: SH
  1. Remove the power steering pump. Refer to Power Steering Pump Replacement .
  2. Remove the power steering pump rear bracket bolts (3).
  3. Remove the power steering pump rear bracket (2) from the engine (1).

Installation Procedure

    Object Number: 354413 Size: SH
  1. Install the power steering pump rear bracket (2) to the engine (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the power steering pump rear bracket bolts (3).

    3. Tighten
    Tighten the bolts (3) to 50 N·m (37 lb ft).

  3. Install the power steering pump. Refer to Power Steering Pump Replacement .
  4. Bleed the power steering system. Refer to Power Steering System Bleeding .