GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Firebird 🢒 Engine 🢒 Engine Controls - 3.8L 🢒 Exhaust Gas Recirculation Valve Replacement

Removal Procedure
  1. Turn OFF the ignition.

    2. Object Number: 187211 Size: SH
  2. Disconnect the electrical connector from the exhaust gas recirculation (EGR) valve.
  3. Remove the two EGR valve retaining nuts (4).
  4. Remove the EGR valve (1).
  5. Remove the gasket (2) from the EGR valve adapter.
  6. Clean the EGR valve adapter (3) from dirt and debris.

Installation Procedure

    Object Number: 187211 Size: SH
  1. Install a new gasket (2) on the EGR adapter.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the EGR valve (1) and two nuts (4).

    3. Tighten
    Tighten the nuts to 30 N·m (22 lb ft).

  3. Connect the EGR valve electrical connector.