Removal Procedure
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Support the transmission with a transmission jack.
- Remove the transmission mount nut (2) and washer.
- Remove the transmission support bolts (2).
- Remove the transmission support (1).
- Remove the transmission mount bolts.
- Remove the transmission mount.
Installation Procedure
- Install the transmission mount.
- Install the transmission mount bolts.
- Install the transmission support (1).
- Install the transmission support bolts (2).
- Install the transmission mount nut (2) and washer.
- Remove the transmission jack.
- Lower the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the transmission mount bolts to 48 N·m (36 lb ft).
Tighten
Tighten the transmission support bolts (2) to 90 N·m (66 lb ft).
Tighten
Tighten the transmission mount nut to (2) 105 N·m (77 lb ft).
