GM Service Manual Online
For 1990-2009 cars only

    Object Number: 220932  Size: SH
  1. Remove the key from the ignition switch.
  2. Connect the inflatable restraint IP module connector located behind the IP compartment door.

  3. Object Number: 220930  Size: SH
  4. Install the connector position assurance (CPA) to the IP module connector located behind the IP compartment door.
  5. Install the right instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages, and Console.

  6. Object Number: 220929  Size: SH
  7. Connect the inflatable restraint steering wheel module coil connector located at the base of the steering column.

  8. Object Number: 220928  Size: SH
  9. Install the CPA to the steering wheel module coil connector located at the base of the steering column.
  10. Install the left instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.

  11. Object Number: 310933  Size: SH
  12. Install the AIR BAG fuse in the IP fuse block.
  13. Install the IP fuse block access door.
  14. Staying well away from both air bags, turn the ignition switch to the RUN position.
  15. 10.1. The AIR BAG indicator will flash 7 times.
    10.2. The AIR BAG indicator will then turn OFF.
  16. Perform Diagnostic System Check - SIR if the AIR BAG indicator does not operate as described.