Step | Action | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you review the Steering Wheel and Column - Tilt Description and Operation and perform the necessary inspections? | Go to Step 2 | |||||||||||||
2 | Verify that the steering column is loose. Is the steering column loose? | Go to Step 3 | System OK | ||||||||||||
3 | Inspect the steering column mounting brackets for looseness. Are the steering column mounting brackets loose? | Go to Step 7 | Go to Step 4 | ||||||||||||
4 | Verify that the steering column bracket capsule is not sheared. Is the steering column bracket capsule sheared? | Go to Step 8 | Go to Step 5 | ||||||||||||
5 | Inspect the support screws for looseness. Are the support screws loose? | Go to Step 9 | Go to Step 6 | ||||||||||||
6 | Verify that the tilt pins are not backed out. Are the tilt pins backed out? | Go to Step 10 | Go to Step 2 | ||||||||||||
7 | Tighten the brackets to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 11 | -- | ||||||||||||
8 | Replace the jacket assembly. Refer to Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle and Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle . Did you complete the replacement? | Go to Step 11 | -- | ||||||||||||
9 | Tighten the support screws to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 11 | -- | ||||||||||||
10 | Inspect the following components for wear or damage. Replace as necessary.
Did you complete the replacement? | Go to Step 11 | -- | ||||||||||||
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
