Removal Procedure
- Remove the front floor
console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.
- Disconnect the park neutral position switch electrical connector
(2).
- Remove the park neutral
position switch bolts.
- Remove the park neutral position switch from the transmission
control.
Installation Procedure
- Ensure that the transmission
control is still in the NEUTRAL position.
- Install the tang on the park neutral position switch, into the
slot on the transmission control.
- Adjust the park neutral switch. Refer to
Park/Neutral Position Switch Adjustment
.
- Connect the park neutral
position switch electrical connector (2).
- Install the front floor console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages,
and Console.