For 1990-2009 cars only
Circuit Description
This diagnostic indicates that the powertrain control module (PCM) detects an internal microprocessor integrity fault.
Conditions for Running the DTC
The PCM is powered-up.
Conditions for Setting the DTC
The PCM detects an internal microprocessor integrity fault.
Action Taken When the DTC Sets
| • | The PCM will illuminate the malfunction indicator lamp (MIL) during the first trip in which the diagnostic test has been run and failed. |
| • | The PCM will store conditions which were present when the DTC set as Freeze Frame and Failure Records data. |
Test Description
The number below refers to the step number on the diagnostic table.
Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the Diagnostic System Check-Engine Controls? | Go to Step 2 | |
Replace the PCM. Refer to Powertrain Control Module Replacement . Did you complete the replacement? | -- |
