GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Firebird 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Driver Knee Bolster Replacement

Removal Procedure

    Object Number: 523613 Size: SH
  1. Remove the instrument panel (IP) knee bolster bolts.
  2. Remove the IP knee bolster.
  3. Disconnect the electrical connector at the rear compartment lid switch.

Installation Procedure

    Object Number: 523613 Size: SH
  1. Connect the electrical connector at the rear compartment lid switch.
  2. Insert the knee bolster tabs into the IP.
  3. Align the knee bolster for the best fit.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the IP knee bolster bolts.

    5. Tighten
    Tighten the bolts to 2 N·m (18 lb in).