Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the Theft Deterrent Diagnostic System Check? | Go to Step 2 | |
2 | Disconnect the BCM connector containing the SECURITY indicator control circuit. Does the SECURITY indicator turn OFF? | Go to Step 5 | Go to Step 3 |
3 | Test for a short to ground in the SCEURITY indicator control circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 6 | Go to Step 4 |
4 |
Important: When replacing the IPC, perform the programming procedure. Refer to Instrument Cluster Programming/Synchronization in Instrument Panel, Gages and Console. Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console. Did you complete the repair? | Go to Step 6 | -- |
5 |
Important: When replacing the BCM, perform the relearn procedure. Refer to Body Control Module (BCM) Programming/RPO Configuration in Body Control System. Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
