Windshield Side Garnish Molding Replacement w/o Lift Off Window Panels

1. Open the vehicle door.
2. Remove the windshield upper garnish molding by pulling away from the inner side frame.

1. Install the windshield upper garnish molding.

•	Align tabs on garnish molding to holes in inner side frame and apply pressure to secure.

•	Align S-clips on garnish molding to door opening flange and apply pressure to secure.

2. Close the vehicle door.

Windshield Side Garnish Molding Replacement w/ Lift Off Window Panels

1. Open the vehicle door.
2. Remove the lift-off window panel.
3. Remove the garnish molding screws.
4. Remove the windshield upper garnish molding by pulling away from the inner side frame.

1. Install the upper garnish molding.

•	Align the clips to the holes on the inner side frame and apply pressure to secure.

•	Align S-clips on upper garnish molding to door opening flange and apply pressure to secure.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the garnish molding screws.

Tighten
Tighten the garnish molding screws to 1.7 N·m (15 lb in).

3. Install the lift-off window panel.
4. Close the vehicle door.