Headlamp Housing Panel Replacement for Pontiac Firebird 2001

Headlamp Housing Panel Replacement Pontiac

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement in Bumpers.
2. Remove the front bumper support bolts and support from the headlamp housing panel and headlamp modules (Pontiac only).



3. Remove the headlamp housing panel bolts (3), nuts (1), and housing panel (4) from radiator support (2).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the headlamp housing panel (4), bolts (3), and nuts (1), to the radiator support (2).

Tighten
Tighten the bolts (3) and nuts (1) to 8 N·m (71 lb ft).

2. Install the front bumper support bolts and support to the headlamp housing panel and the headlamp modules (Pontiac only).

Tighten
Tighten the bolts to 2 N·m (18 lb in).

3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement in Bumpers.