Front Wheel Speed Sensor Wiring Harness Replacement Right

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle



2. Disconnect the wheel speed sensor connector (1).
3. Remove the jumper harness from the retaining clip.
4. Remove the grommet retainer at the inner fender.
5. Remove the harness cover from the right strut tower.
6. Disconnect the upper jumper harness connector.
7. Pull the grommet through the inner fender pass-through and remove the jumper harness.

1. Route the new jumper harness through inner fender pass-through.
2. Connect the upper jumper harness connector.
3. Install the harness cover on the right strut tower.
4. Install the grommet retainer at the inner fender.
5. Install the jumper harness from the retaining clip.
6. Connect the wheel speed sensor connector (1).
7. Lower vehicle.

Front Wheel Speed Sensor Wiring Harness Replacement Left

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle



2. Disconnect the wheel speed sensor connector (1).
3. Remove the jumper harness from the retaining clip.
4. Remove the grommet retainer at the inner fender.
5. Remove the transmission cable retainer and various harnesses from restraints at the left strut tower in order to access the jumper harness connector.
6. Disconnect the upper jumper harness connector.
7. Pull the grommet through the inner fender pass-through and remove the jumper harness.

1. Route the new jumper harness through the inner fender pass-through.
2. Connect the upper jumper harness connector.
3. Install the transmission cable retainer and various harnesses to the restraints that may have been disconnected in order to access the jumper harness.
4. Install the grommet retainer at the inner fender.
5. Install the jumper harness from the retaining clip.
6. Connect the wheel speed sensor connector (1).
7. Lower vehicle.