Rear Wheel Speed Sensor Wiring Harness Replacement Without Traction Control

1. Raise and support the vehicle.Refer to Lifting and Jacking the Vehicle



2. Disconnect the wheel speed sensor connector.
3. Remove the rear wheel speed sensor jumper harness grommet (1) from the retainer (4).
4. Remove the upper harness connector from the rear body pass-through connector.

1. Install the upper harness connector from the rear body pass-through connector.
2. Install the rear wheel speed sensor jumper harness grommet (1) to the retainer (4).
3. Connect the wheel speed sensor connector.
4. Lower vehicle.

Rear Wheel Speed Sensor Wiring Harness Replacement With Traction Control

1. Raise and support vehicle. Rfer to Lifting and Jacking the Vehicle



2. Disconnect the wheel speed sensor connectors (2,3).
3. Remove the jumper harness grommet from the retainer.
4. Remove the upper jumper harness connector from the rear body pass-through connector.

1. Install the upper jumper harness connector to the rear body pass-through connector.
2. Install the jumper harness grommet to the retainer.
3. Connect the wheel speed sensor connectors (2,3).
4. Lower vehicle.