For 1990-2009 cars only
- Inspect the driveline torque arm (5) at the drive axle (1) for looseness, damage, and/or deformities which may be altering the driveline working angles. If the torque arm exhibited any of these conditions, it requires tightening, repair, or replacement.
- Inspect the front propeller shaft support bearing assembly (2) for damaged rubber components, worn bearings, or a damaged/cracked bracket which could be affecting the angles of the propeller shafts.
- If the support bearing assembly exhibited any of these conditions, it requires replacement.
- Inspect the propeller shaft support bearing assembly (2) for loose or missing shims/washers, if equipped. Reinstall correctly or replace any shims/washers as necessary to ensure proper alignment of the support bearing assembly.
- Inspect the driveline torque arm (4) at the transmission (1) for damage and/or deformities which may be altering the driveline working angles. If torque arm exhibited any of these conditions, the torque arm requires repair or replacement.
- Inspect the driveline torque arm to transmission brackets and bushings (2, 3, 8) for looseness, damage, and/or deformities which may be altering the driveline working angles. If any of the brackets and/or bushings exhibited any of these conditions, the affected bracket/bushing requires replacement.
- Inspect the transmission mount for excessive wear, damage, and/or deformities which may be altering the driveline working angles. If the transmission mount exhibited any of these conditions, the mount requires replacement.
