Engine Flywheel Installation Automatic Transmission
Tools Required
J 36660-A Torque Angle Meter
- Install the flywheel.
- Install the new flywheel bolts.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 15 N·m (11 lb ft). Use
the J 36660-A
to tighten
the bolts an additional 50 degrees.
Engine Flywheel Installation Manual Transmission
Tools Required
J 36660-A Torque Angle Meter
- Install the flywheel.
- Install the new flywheel bolts.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 15 N·m (11 lb ft). Use J 36660-A
to tighten the bolts an
additional 50 degrees.
