GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Firebird 🢒 Steering 🢒 Steering Wheel and Column 🢒 Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle

    Object Number: 343861 Size: SH
  1. Install the windshield wiper and washer switch assembly to the lock housing cover and sleeve assembly.
  2. Lubricate the switch actuator pivot pin (2) with lithium grease.
  3. Install the switch actuator pivot pin (2) into the windshield wiper and washer switch assembly (1) and the lock housing cover and sleeve assembly.

    4. Caution: Improper routing of the wire harness assembly may damage the inflatable restraint steering wheel module coil. This may result in a malfunction of the coil, which may cause personal injury.

    Important: Pull carefully on all the wires to remove any wire kinks that may be inside the steering column assembly.

  4. Pull the windshield wiper and washer switch assembly wire harness through the steering column.
  5. Install the windshield wiper and washer switch assembly connector to the bulkhead connector.
  6. Install the wire protector shield.
  7. Install the lock housing assembly. Refer to Lock Housing Assembly - Assemble - Off Vehicle .
  8. Enable the inflatable restraint steering wheel module. Refer to Enabling the SIR System in SIR.