Removal Procedure
- Place a drain pan under
the power steering fluid reservoir (2).
- Remove the following components from the power steering fluid
reservoir (2):
• | The power steering reservoir hose (10) |
- Remove the capstick (1) from the power steering fluid
reservoir (2) and allow the power steering fluid to drain into the
pan.
- Raise the vehicle on a hoist. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Place a drain pan under the power steering pump (7).
- Remove the following components from the power steering pump (7):
• | The power steering reservoir hose (10) |
- Remove the power steering reservoir hose (10) from the
vehicle.
Installation Procedure
- Install the power steering
reservoir hose (10) to the vehicle.
- Install the following components to the power steering pump (7):
• | The power steering reservoir hose (10) |
- Lower the vehicle.
- Install the following components to the power steering fluid reservoir (2):
• | The power steering reservoir hose (10) |
- Bleed the power steering system. Refer to
Power Steering System Bleeding