- Disable the inflatable restraint steering wheel module. Refer to Disabling the SIR System in SIR.
- Remove the steering column lock cylinder set. Refer to Steering Column Lock Cylinder Set - Disassemble - Off Vehicle .
- Remove the column housing cover end cap (2).
- Remove the 3 pan head 6-lobed socket tapping screws: (1) at 12 o'clock, (2) at 3 o'clock and (3) at 8 o'clock.
- Remove the lock housing cover and sleeve assembly (1).
- Remove the switch actuator pivot pin (2).
- Remove the windshield wiper and washer switch assembly (1) from the lock housing cover assembly.
Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:
• Air bag deployment • Personal injury • Unnecessary SIR system repairs • Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring. • If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System.
Remove the cruise control connector (3) from the base plate (1) and disconnect.
Remove the column housing cover end base plate (2) and the dimmer switch rod actuator (3).
