For 1990-2009 cars only
Removal Procedure
- Open the hood.
- Disconnect the electrical connector from the headlamp bulb/socket.
- Rotate the bulb/socket counterclockwise to remove from the headlamp.
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
Installation Procedure
- Install the headlamp bulb/socket to the rear of the headlamp, rotating clockwise until fully seated.
- Connect the electrical connector to the headlamp bulb/socket.
- Close the hood.
