For 1990-2009 cars only
- Remove the camshaft timing belt pulley.
- Remove the outboard ignition coil from the camshaft sensor housing.
- Remove the camshaft sensor from the camshaft sensor housing.
- Remove the three camshaft sensor housing bolts (2) and the camshaft sensor housing from the cylinder head.
- Loosen all valve adjusting screw lock nuts (2), turn adjusting screws back all the way to allow all rocker arms to move freely.
- Gradually remove the twelve camshaft housing bolts in the sequence shown.
- Remove the camshaft.
Important: In order to catch any oil, place a shop rag under the camshaft housing before removing it from the cylinder head.
