Name | Location | Locator View | Connector End View |
|---|---|---|---|
Data Link Connector (DLC) OBD 2 | Below the left side of the IP, near the center console | ||
Electronic Brake Control Module (EBCM) (With ABS) | Behind the left IP, above the junction block | Antilock Brakes System Connector End Views | |
Inflatable Restraint Sensing and Diagnostic Module (SDM) | Center of the console, in front of the manual selector | SIR Component Views | |
Junction Block | Behind left side of the IP | ||
Powertrain Control Module (PCM) | Behind the right side of the IP, near the glove box | Powertrain Control Module Connector End Views in Engine Controls - 1.3L or Powertrain Control Module Connector End Views or Engine Controls - 1.0 L. | |
C200 (12 Cavities) | Main harness to the IP harness, behind the left IP, near junction block | ||
C205 (12 Cavities) | IP harness to engine harness, behind the right side of the IP, near the powertrain control module (PCM) | ||
C210 (5 Cavities) | Supplemental inflatable restraint (SIR) harness to the IP harness, behind the left side of the IP, near the junction block | ||
G105 (VIN 6) | Center rear of engine, on the intake manifold | -- | -- |
G203 | Junction block case ground, under the left side of the IP | -- | -- |
S222 | IP harness, approximately 6 cm (2.375 in) from the data link connector - (DLC-OBD2) breakout | -- | |
S235 | IP harness, approximately 5 cm (2 in) from the C200 breakout | -- | |
S236 | IP harness, approximately 8 cm (3.125 in) from the IP cluster assembly connector C3 breakout | -- | |
S237 | IP harness, approximately 10 cm (4 in) from the radio connector breakout | -- | |
S240 | IP harness, approximately 6 cm (2.375 in) from the data link connector - (DLC-OBD2) breakout | -- | |
S245 | IP harness, approximately 12 cm (5 in) from the I/P cluster assembly connector C3 breakout | -- | |
S249 | IP harness, approximately 1 cm (.375 in) from the IP cluster assembly connector C2 breakout | -- |
