1

1. Connect a scan tool.
2. Inspect for engine or automatic transmission DTCs.

Are any DTCs set?

--

Diagnostic Trouble Code (DTC) List - Vehicle

Go to Step 2

1. Turn the ignition OFF.
2. Disconnect the engine control module (ECM) connector.
3. Remove the instrument cluster.
4. Inspect continuity between terminal 3 of the vehicle speed sensor connector and the instrument cluster connector terminal 2.

Does the ohmmeter indicate the specified value?

0 ohms

Go to Step 4

Go to Step 3

Repair the open circuit between the instrument cluster connector terminal 2 and terminal 3 of the vehicle speed sensor connector.

Is the repair complete?

--

System OK

--

Replace the speedometer.

Is the repair complete?

--

System OK

--