1. Turn the ignition ON.
2. Turn the wiper switch to LO.

Is battery voltage available at wiper motor connector terminal 5?

11-14 V

Go to Step 2

Go to Step 3

Replace the wiper motor. Refer to Windshield Wiper Motor Replacement .

Is the repair complete?

--

System OK

--

1. Use an ohmmeter to test the continuity of the wiper switch.
2. Turn the wiper switch to LO. Check for continuity between the wiper switch terminal 8 and 5.

Is there continuity between terminals 8 and 5?

0 ohms

Go to Step 5

Go to Step 4

Replace the wiper switch. Refer to Windshield Wiper and Washer Switch Replacement .

Is the repair complete?

--

System OK

--

Repair the open circuit between the wiper switch connector terminal 5 and the wiper motor connector terminal 5.

Is the repair complete?

--

System OK

--