Sealing and Caulking Specifications. Pontiac G3 2007

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2007 🢒 G3 🢒 Body Repair 🢒 Collision Repair 🢒 Sealing and Caulking Specifications

Important: Apply putty in areas indicated before painting.

Important: Apply putty in areas indicated before painting.


(1)	Spot Weld Sealer
(2)	Body Sealer
(3)	Sealant to be wiped
(4)	Dash Top Panel
(5)	Side Outer Panel
(6)	Front Pillar Lower Reinforcement
(7)	Sealing area
(8)	Hood Hinge Lower Bracket
(9)	Dash Side Panel

Important: Apply putty in areas indicated before painting.


(1)	Spot Tape Seal

Important: Apply putty in areas indicated before painting.


(1)	Body Sealer
(2)	Caulking Sealer


(1)	Side Inner Panel
(2)	Side Outer Panel
(3)	Body Sealer
(4)	Tail Lamp Housing
(5)	Back Lower Side Reinforcement
(6)	Lamp Housing Lower
(7)	Side Inner Panel
(8)	Back Lower Panel

Important: Keep roof mounting clips free of sealant on both side of roof.

Wipe off excess sealant from screen flange.


(1)	Side Outer Panel
(2)	Body Sealer
(3)	Roof Panel
(4)	Roof Side Inner Panel
(5)	Front Pillar Upper Reinforcement
(6)	Sealer to be Wiped for Roof Molding Mounting
(7)	Sealer to be Wiped for Glass Matching

Important: Paint drain holes in order to be free of sealer.


(1)	Sealer to be Wiped in this Area
(2)	Body Sealer

Important: Paint drain holes in order to be free of sealer.


(1)	Area to be Closed by Sealer
(2)	Body Sealer
(3)	Water Drain Hole to be Free of Sealer

Important: Ensure water drain holes are free of sealer in the 5 locations on both doors.


(1)	Water Drain Holes to be Free of Sealer
(2)	Sealer to be Wiped Around Door Corners
(3)	Apply Wax to Door Hinge