Valve Rocker Arm Cleaning and Inspection for Pontiac G3 2009

1. Inspect the valve stem tip for wear.
2. Inspect the valve key grooves and the oil seal grooves for chips and wear.
3. Inspect the valves for burns or cracks.
4. Inspect the valve stem for burrs and scratches.
5. Inspect the valve stem. The valve stem must be straight.
6. Inspect the valve face for grooving. If the groove is so deep that refacing the valve would result in a sharp edge, replace the valve.



7. Inspect the valve spring. If the valve spring ends are not parallel, replace the valve spring.
8. Measure the valve spring height. Refer to Engine Mechanical Specifications. If the valve spring height does not match the specifications, replace the valve spring.

Warning: Refer to Safety Glasses Warning in the Preface section.




1. Clean the cylinder head.
2. Clean the valve guides.
3. Clean all of the threaded holes.
4. Clean the valves of carbon, oil, and varnish.