GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1348510 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the manifold absolute pressure (MAP) sensor electrical connector.
  3. Disconnect the vacuum hose.
  4. Remove the MAP sensor bolt.
  5. Remove the MAP sensor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1348510 Size: SH
  1. Install the MAP sensor with the bolt.

    2. Tighten
    Tighten the MAP sensor bolt to 10 N·m (89 lb in).

  2. Connect the vacuum hose.
  3. Connect the MAP sensor electrical connector.
  4. Connect the negative battery cable.