GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Camshaft Position Actuator Solenoid Valve Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 2049252 Size: SH
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disconnect the camshaft position actuator valve connectors.
  3. Remove the camshaft position actuator valve bolt.
  4. Remove the camshaft position actuator valve (1) and seal.

Installation Procedure

    Object Number: 2049252 Size: SH
  1. Install the camshaft position actuator valve (1) and seal. Coat seal with clean engine oil prior to installation.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the camshaft position actuator valve bolt.

    3. Tighten
    Tighten the camshaft position actuator valve bolt to 6 N·m (53 lb in).

  3. Connect the camshaft position actuator valve connectors.
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.