Front Side Door Trim Panel Replacement Notchback

1. Lower the front window.
2. Remove the window regulator handle, if equipped.
3. Remove the door pull screws.
4. Using a flat-bladed tool, gently pry off the inside door pull handle cover.



5. Pry off the trim panel.
6. Disconnect the necessary electrical connectors, if equipped.

1. Connect the necessary electrical connectors, if equipped.



2. Install the trim panel.



3. Install the door pull screw.
4. Install the door pull trim cover.
5. Install the window regulator handle, if equipped.
6. Raise the window.

Front Side Door Trim Panel Replacement Hatchback

Special Tools

J 21104-B (KM 475-B) Weatherstrip Remover Universal

1. Lower the front window.
2. Remove the door pull screw.
3. Remove the inside door handle.
4. Remove the screws at the base of the trim panel.



5. Pry off the trim panel using the trim remover J 21104-B  (1).

1. Install the trim panel.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the screws at the base of the trim panel and tighten to 3.5 N·m (31 lb in).
3. Install the inside door handle.



4. Install the door pull screw and tighten to 3.5 N·m (31 lb in).
5. Raise the window.