Preliminary Procedures

1. Remove the center instrument trim panel. Refer to Instrument Panel Center Trim Panel Replacement .
2. Remove the HVAC controls.

1

Radio Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Radio

Procedure

1. Disconnect the electrical and antenna connectors.
2. Reprogram the radio. Refer to Control Module References .

Tip
The HVAC control connector-1 and the radio connector-2 can be interchanged. Mark or place tape on the connector to avoid accidental interchange.