Windshield Pillar Garnish Molding Replacement Sedan

1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
2. Partially remove the front door weatherstrip. Refer to Front Door Opening Weatherstrip Replacement .



3. Remove the cover from the garnish trim fasteners.



4. Remove the garnish trim fasteners.



5. Starting at the top, remove the windshield garnish trim by pulling straight out.

1. Starting at the bottom, install the windshield garnish trim.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the garnish trim fastener.

Tighten
Tighten the fastener to 3 N·m (26 lb in).




3. Install the cover to the garnish trim fastener.
4. Install the front door weatherstrip. Refer to Front Door Opening Weatherstrip Replacement .
5. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling .

Windshield Pillar Garnish Molding Replacement Convertible