GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Drain the washer solvent from the washer solvent container.
  2. Remove the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.

  3. Object Number: 1207514  Size: SH
  4. Disconnect the washer solvent container level sensor electrical connector.
  5. Using a small flat-bladed tool, remove the washer solvent level sensor (4) from the washer solvent container (1).
  6. Using a small flat-bladed tool, remove the level sensor seal (3) from the washer solvent container (1).

Installation Procedure


    Object Number: 1207514  Size: SH
  1. Position the level sensor seal (3) to the washer solvent container (1), pressing in until fully seated.
  2. Position the washer solvent level sensor (4) to the washer solvent container (1), pressing in until fully seated.
  3. Connect the washer solvent level sensor electrical connector.
  4. Install the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  5. Fill the washer solvent container with washer solvent .