GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Engine 🢒 Engine Electrical 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure

    Object Number: 1239001 Size: SH
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
  3. Remove the MAP sensor attaching screw.
  4. Remove the MAP sensor and MAP sensor seal from the upper intake manifold.

Installation Procedure

    Object Number: 1239001 Size: SH
  1. Install the MAP sensor and MAP sensor seal into the upper intake manifold.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the MAP sensor attaching screw.

    3. Tighten
    Tighten the attaching screw to 6.5 N·m (57 lb in).

  3. Connect the MAP sensor electrical connector.
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .