For 1990-2009 cars only
Removal Procedure
- Remove the fuel tank. Refer to Fuel Tank Replacement.
- Disconnect the evaporative emission (EVAP) canister to EVAP canister vent solenoid valve line quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service.
- Disconnect the fuel tank EVAP vapor line to EVAP canister quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service.
- From under the fuel tank, remove the TORX® bolt attaching the EVAP canister to bracket.
- Slide the EVAP canister upward from the bracket.
Installation Procedure
- Slide the NEW EVAP canister down into the bracket.
- From under the fuel tank, install the TORX® bolt attaching the EVAP canister to bracket.
- Connect the fuel tank EVAP vapor line to EVAP canister quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service.
- Connect the EVAP canister to EVAP canister vent solenoid valve line quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service.
- Install the fuel tank. Refer to Fuel Tank Replacement.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
