GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Horn Replacement

Removal Procedure
  1. Remove the left headlamp assembly. Refer to Headlamp Replacement .

    2. Object Number: 1317330 Size: MH
  2. Disconnect the horn electrical connector.
  3. Remove the horn bracket bolt.
  4. Remove the horn from the front frame rail.

Installation Procedure

    Object Number: 1317330 Size: MH
  1. Position the horn into the slot in the front frame rail.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the horn bracket bolt.

    3. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  3. Connect the horn electrical connector.
  4. Install the left headlamp assembly. Refer to Headlamp Replacement .