GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 G6 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Battery Positive Cable Replacement

Battery Positive Cable Replacement LZ4/LZ9

Removal Procedure

    Object Number: 1783030 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Loosen the positive battery cable bolt (5) and remove the positive battery cable from the battery.
  3. Loosen the positive battery cable bolt (6) at the junction block and remove the cable from the junction block.
  4. Remove the positive battery cable clip (4) from the battery tray.
  5. Remove the tape holding the negative battery cable to the positive battery cable.

    6. Object Number: 1584682 Size: SH
  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. Remove the positive battery cable nut (3) from the starter solenoid.
  8. Remove the positive battery cable (1) from the starter solenoid.
  9. Lower the vehicle.
  10. Remove the positive battery cable.

Installation Procedure

    Object Number: 1584682 Size: SH
  1. Install the positive battery cable.
  2. Raise and the vehicle.
  3. Install the positive battery cable (1) to the starter solenoid.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the positive battery cable nut (3) to the starter solenoid.

    5. Tighten
    Tighten the nut to 10 N·m (89 lb in).

  5. Lower the vehicle.

    6. Object Number: 1783030 Size: SH
  6. Install the positive battery cable to the junction block and tighten the positive battery cable bolt (6).

    7. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  7. Install the positive battery cable clip (4) to the battery tray.
  8. Install tape in order to secure the negative battery cable to the positive battery cable.
  9. Position the positive battery cable to the battery.
  10. Tighten the positive battery cable bolt (5).

    11. Tighten
    Tighten the bolt to 17 N·m (13 lb ft).

  11. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

Battery Positive Cable Replacement LE5

Removal Procedure

    Object Number: 1783030 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Loosen the positive battery cable bolt (5) and remove the positive battery cable from the battery.
  3. Loosen the positive battery cable bolt (6) at the junction block and remove the cable from the junction block.
  4. Remove the positive battery cable clip (4) from the battery tray.
  5. Remove the tape holding the negative battery cable to the positive battery cable.

    6. Object Number: 1784310 Size: SH
  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. Remove the positive battery cable nut (1) from the starter solenoid.
  8. Remove the positive battery cable (2) from the starter solenoid.
  9. Lower the vehicle.
  10. Remove the positive battery cable.

Installation Procedure

    Object Number: 1784310 Size: SH
  1. Install the positive battery cable.
  2. Raise and the vehicle.
  3. Install the positive battery cable (2) to the starter solenoid.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the positive battery cable nut (1) to the starter solenoid.

    5. Tighten
    Tighten the nut to 10 N·m (89 lb in).

  5. Lower the vehicle.

    6. Object Number: 1783030 Size: SH
  6. Install the positive battery cable to the junction block and tighten the positive battery cable bolt (6).

    7. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  7. Install the positive battery cable clip (4) to the battery tray.
  8. Install tape in order to secure the negative battery cable to the positive battery cable.
  9. Position the positive battery cable to the battery.
  10. Tighten the positive battery cable bolt (5).

    11. Tighten
    Tighten the bolt to 17 N·m (13 lb ft).

  11. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

Battery Positive Cable Replacement LY7

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disconnect the positive battery cable from the battery.
  3. Loosen the positive battery cable bolt at the junction block and remove the cable from the junction block.
  4. Remove the positive battery cable clip from the battery tray.
  5. Remove the tape holding the negative battery cable to the positive battery cable.

    6. Object Number: 1644827 Size: SH
  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  7. Remove the positive battery cable nut from the starter solenoid.
  8. Remove the positive battery cable from the starter solenoid.
  9. Lower the vehicle.
  10. Remove the positive battery cable from the vehicle.

Installation Procedure

    Object Number: 1644827 Size: SH
  1. Route the positive cable to the starter and the battery.
  2. Raise the vehicle.
  3. Install the positive cable to the starter solenoid.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the positive cable nut to the starter solenoid stud.

    5. Tighten
    Tighten the nut to 13 N·m (115 lb in).

  5. Lower the vehicle.
  6. Install the positive cable to the junction block and tighten the positive cable bolt.

    7. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  7. Install the positive cable clip (4) to the battery tray.
  8. Install tape to secure the negative battery cable to the positive battery cable.
  9. Install the positive cable to the positive terminal of the battery.
  10. Tighten the positive cable bolt).

    11. Tighten
    Tighten the bolt to 17 N·m (13 lb ft).

  11. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.