GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 G6 🢒 Driver Information and Entertainment 🢒 Displays and Gages 🢒 Instrument Cluster Replacement

Removal Procedure

    Object Number: 1207644 Size: SH
  1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  2. Remove the I/P cluster screws.
  3. Remove the I/P cluster.
  4. Remove the I/P cluster wire harness connector.

Installation Procedure

    Object Number: 1207644 Size: SH
  1. Install the I/P cluster wire harness connector.
  2. Install the I/P cluster.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the I/P cluster screws.

    4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  4. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
  5. Refer to Control Module References for programming and setup information.