Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

1

Front Door Nameplate

1. When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old nameplate. Clean all the adhesive residue from the door, wipe the surface dry with a clean lint-free towel prior to installing the new GM nameplate.
3. Press the nameplate firmly to the front door to ensure full adhesion to the door.

1

Front Side Door Emblem/Nameplate

Procedure

1. When removing protective liners from adhesive backed emblem/nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old emblem/nameplate.
3. Using a 50/50 solution by volume of isopropyl alcohol and clean drinkable water, clean all the adhesive residue from the door.
4. Wipe the surface dry with a clean lint-free towel prior to installing new emblem/nameplate.
5. Close the front door.
6. Press the emblem/nameplate firmly to the front door to ensure full adhesion is made to the door.

Special Tools

J 25070 Heat Gun 500-750°F