GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 G6 🢒 Preface 🢒 Cautions and Notices 🢒 Center Pillar Lower Garnish Molding Replacement

Removal Procedure

    Object Number: 1533886 Size: SH
  1. Disable the side impact SIR system, if equipped. Refer to SIR Disabling and Enabling.
  2. Remove the front carpet retainer. Refer to Front Carpet Retainer Replacement.
  3. Remove the lower rear lock pillar trim. Refer to Body Lock Pillar Lower Trim Panel Replacement.
  4. Remove the center pillar garnish molding by performing the following steps:
    5. 4.1. Beginning at the top, release the upper garnish molding clips by pulling away from the center pillar.
    4.2. Pull up towards the roof to release the lower garnish molding clips.
    4.3. Remove the garnish molding from the vehicle.

Installation Procedure

    Object Number: 1533886 Size: SH
  1. Beginning at the bottom, install the garnish molding.
  2. Install the lower rear lock pillar trim. Refer to Body Lock Pillar Lower Trim Panel Replacement.
  3. Install the front carpet retainer. Refer to Front Carpet Retainer Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling.