GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 G6 🢒 General Information 🢒 General Information 🢒 Rear Wheelhouse Panel Liner Replacement

Removal Procedure

    Object Number: 1315945 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear tires and wheels. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 1552394 Size: SH
  3. Remove the rear wheel housing , pre-cut the liner in the areas (1, 2) to remove.
  4. Remove the rear wheelhouse liner-to-rear wheelhouse retainers.
  5. Remove the rear wheelhouse liner nuts.
  6. Remove the rear wheelhouse liner from the vehicle.

Installation Procedure

    Object Number: 1315945 Size: SH
  1. Install the rear wheelhouse liner to the vehicle.

    2. If replacing the wheelhousing liners with a new one, refer to step 3 in the removal.

  2. Install the rear wheelhouse liner fasteners.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the rear wheelhouse liner nuts.

    4. Tighten
    Tighten the nut to 5 N·m (44 lb in).

  4. Install the rear tires and wheels. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.