Mass Airflow Sensor with Intake Air Temperature Sensor Replacement NU6

Mass Airflow Sensor with Intake Air Temperature Sensor Replacement NT7

1. Remove the positive crankcase ventilation (PCV) fresh air tube from the air cleaner intake duct.



2. Disconnect the mass air flow (MAF) sensor electrical connector (1).



3. Loosen the clamps and remove the air cleaner intake duct with the MAF sensor from the throttle body and the air cleaner housing cover.
4. Loosen the clamp and remove the MAF sensor from the air cleaner intake duct.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the MAF sensor to the air cleaner intake duct.

Tighten
Tighten the clamp to 2 N·m (18 lb in).

2. Install the air cleaner intake duct with the MAF sensor to the throttle body and the air cleaner housing cover.

Tighten
Tighten the clamps to 2 N·m (18 lb in).




3. Connect the MAF sensor electrical connector (1).



4. Install the PCV fresh air tube to the air cleaner intake duct.
5. Start and idle the engine.
6. Inspect the air intake duct for leaks.