Removal Procedure
- Remove the positive crankcase ventilation (PCV) fresh air tube from the air cleaner outlet duct.
- Loosen the air cleaner outlet duct clamps at the mass air flow (MAF)/intake air temperature (IAT) sensor and throttle body.
- Remove the air cleaner outlet duct bolt (1).
- Remove the air cleaner outlet duct.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the air cleaner outlet duct.
- Install the air cleaner outlet duct bolt (1).
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Tighten the air cleaner outlet duct clamps at the MAF/IAT sensor and throttle body.
Tighten
Tighten the clamps to 2 N·m (18 lb in).
- Install the PCV fresh air tube to the air cleaner intake duct.