GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G6 🢒 Engine 🢒 Engine Mechanical - 3.9L 🢒 Oil Level Indicator Tube Replacement

Removal Procedure

    Object Number: 1581869 Size: SH
  1. Remove the spark plug wire from the number 6 cylinder spark plug.
  2. Remove the heated oxygen sensor (HO2S) clip (3) from the fill tube bracket.

    3. Object Number: 1581866 Size: SH
  3. Remove the oil level indicator.
  4. Remove the oil level indicator tube bracket bolt.
  5. Remove the oil level indicator tube.
  6. Inspect the oil level indicator tube O-ring seal, for damage, replace as necessary.

Installation Procedure

    Object Number: 1581866 Size: SH
  1. Lubricate the oil level indicator tube O-ring seal with clean engine oil.
  2. Install the oil level indicator tube into the engine block.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the oil level indicator tube bracket bolt.

    4. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).

  4. Install the oil level indicator.

    5. Object Number: 1581869 Size: SH
  5. Install the HO2S clip (3) to the fill tube bracket.
  6. Install the spark plug wire to the number 6 cylinder spark plug.