GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G6 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Front Floor Console Rear Cup Holder Replacement

Removal Procedure
  1. Remove the console armrest. Refer to Front Floor Console Armrest Replacement.
  2. Open the rear cup holder.
  3. Remove the console rear cup holder screws.
  4. Pull out on the bottom of the cupholder to disengage the cupholder from the hooks at the top.

    5. Object Number: 1208000 Size: SH
  5. Remove the console rear cup holder.

Installation Procedure

    Object Number: 1208000 Size: SH
  1. Engage the cupholder to the hooks at the top of the floor console and install the cupholder.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the console rear cup holder screws.

    3. Tighten
    Tighten the screws to 1 N·m (10 lb in).

  3. Install the console armrest. Refer to Front Floor Console Armrest Replacement.