GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 2039769  Size: SH
  1. Remove the headliner assembly. Refer to Headlining Trim Panel Replacement.
  2. Disconnect the antenna harness connectors (1).
  3. Remove the antenna module ground to roof panel retaining bolt (2).
  4. Remove the antenna module ground (5).
  5. Remove the antenna module to roof panel retaining bolt (3).
  6. Remove the retaining clip (4) securing the antenna module to the roof.
  7. From outside the vehicle, remove the antenna module assembly, threading the harness through the roof cavity.

Installation Procedure


    Object Number: 2039769  Size: SH
  1. From outside the vehicle, install the antenna module assembly to the vehicle, threading the harness through the roof cavity.
  2. Important: Listen for an audible click to confirm correct installation of the retaining clip (4)

  3. Install the retaining clip (4) securing the antenna module to the roof panel.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the antenna module to roof panel retaining bolt (3).
  6. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

    Important: Make sure that the antenna module ground (5) makes a good connection to the body.

  7. Install the antenna module ground to roof panel retaining bolt (2).
  8. Tighten
    Tighten the bolt to 22 N·m (195 lb in).

  9. Connect the electrical connectors (1).
  10. Install the headliner assembly. Refer to Headlining Trim Panel Replacement.