For 1990-2009 cars only
Removal Procedure
- Disconnect the vehicle battery. Refer to Battery Negative Cable Disconnection and Connection .
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
- Using suitable force, lift the heated seat control module (2) to disengage the clip (1) from the bracket (3).
- Press down the retaining clip (2) and pull the heated seat control module (1) away.
Caution: Refer to Battery Disconnect Caution in the Preface section.
Caution: Refer to SIR Caution in the Preface section.
Installation Procedure
- Press down the retaining clip (2) and push the heated seat control module (1) back in.
- Engage the clip (1) of the heated seat control module (2) to the bracket (3), listen for an audible click to confirm fitting.
- Install the front bucket seat. Refer to Front Seat Replacement - Bucket .
- Enable the SIR system. Refer to SIR Disabling and Enabling .
- Connect the vehicle battery. Refer to Battery Negative Cable Disconnection and Connection .
