Radio Scan Tool Data Parameters
Parameter | Operating Conditions | Expected Value | Definition |
|---|---|---|---|
Ignition is ON, engine OFF, and vehicle is stationary | |||
Antenna | Main set | ||
Bass | Standard | The scan tool displays the current bass setting. | |
Battery Voltage | -- | 12 Volts | This displays volts. This is the voltage input supplied to the digital radio receiver. |
CD Status | -- | OK | |
CD Status | Valid | The scan tool displays Valid or Invalid | |
Invalid | |||
CD Type | CD | ||
CD Changer Disc Number | 1-6 | This is the status of the CD changer. | |
Chime Mode | On | The scan tool displays On or OFF. | |
Off | |||
Dial Type | Valid | The scan tool displays Valid or Invalid. | |
Invalid | |||
Equalizer Boost | 0 | ||
Equalizer | On | The scan tool displays On or OFF. | |
Off | |||
Internal Communication | -- | OK | |
Mute | Mute button pressed | On | The scan tool displays if the audio unit mute button has been activated or deactivated. |
Mute button depressed | Off | ||
Navigation System | -- | Active | |
-- | Inactive | ||
Phone Active | -- | Active | |
-- | Inactive | ||
Power Mode | -- | Run | The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch. |
Preset Status | 1 | The scan tool displays a preset number 1-6. This is the preset number when the radio is on a preset station. | |
Radio Button Stuck | -- | Yes | This displays if a radio button is stuck |
-- | No | ||
Radio Button | A/C Off | ||
Radio Button Status | Released | ||
Depressed | |||
Singe CD Track Number | 1 | The scan tool displays the current track number on the CD. | |
Search Sensitivity Status | Auto | ||
Manual | |||
Signal Strength | -- | Varies | This displays dBuV. This is the signal strength of the radio. |
Speed Compensated Volume Curve | Zone 2 | ||
Source | -- | Tuner | This indicates the source of the audio signal currently being output. |
Surround Sound Status | -- | On | |
-- | Off | ||
Surround Sound Status | Stereo | ||
Mono | |||
Treble | Standard | The scan tool displays the current treble setting. | |
Volume | 0 - 100% | User Dependent | The scan tool displays the current volume setting. |
Radio Scan Tool Output Controls
Parameter | Operating Conditions | Definition |
|---|---|---|
Ignition is ON, engine OFF, and vehicle is stationary | ||
Audio Mute | Special Functions Output Control | The scan tool displays if the audio unit mute button has been activated or deactivated. |
Left Front Speaker | Special Functions Front Speakers | The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Left Rear Speaker | Special Functions Rear Speakers | The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Front Speaker | Special Functions Front Speakers | The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Rear Speaker | Special Functions Rear Speakers | The scan tool commands the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
